Sweet Berta's panel

Semi-modular monophonic synth

Sweet Berta

One voice, patched your way. Two oscillators, a ladder filter, a sequencer and an arpeggiator, a patch bay of cables, and a spring reverb.

The launch

Free to claim

Opens: October 21, 2026 at 12:00 AM UTC. No closing date yet.

Sweet Berta installs with the Ozner Audio app and a free account. Get the app

AUVST3Standalone

The gallery

Every side of the panel, as the plugin draws it
The Front

The Front. Macros, the Case, the synth's modules, the Pedalboard and the keyboard, in the Hardware theme.

Three looks

Settings › Theme, any time: the sound never changes
The Front in the Hardware theme

Hardware

The panel as a piece of gear: bat levers, round arcade buttons, gripped knobs on a printed plate.

Normalled as the hardware is, so it plays with no cable at all; a cable into a jack breaks its normal and reroutes it. Inputs on the left of each group, outputs on the right.

LFO

INRate In

Adds to the LFO's Rate knob; a stereo cable runs a left and a right LFO, each at its own rate.

INSync In

Restarts the LFO's cycle on a rising edge; a stereo cable restarts each side's LFO on its own.

OUTS/H Out

Noise sampled at the start of each LFO cycle.

OUTWave Out

The LFO itself, not scaled by the mod wheel.

Osc 1

INPitch In

Replaces the LFO's pitch modulation; the keys still play osc 1.

INPWM In

Moves osc 1's pulse width (Square and Narrow Pulse).

OUTWave Out

Osc 1's waveform.

Osc 2

INPitch In

Replaces the LFO's pitch modulation; the keys still play osc 2.

INLin FM In

Linear FM: moves osc 2's frequency in Hz, for bells and clangs.

OUTWave Out

Osc 2's waveform.

Mixer

INOsc 1 In

Replaces osc 1 as the mixer's Osc 1 channel.

INOsc 2 In

Replaces osc 2 as the mixer's Osc 2 channel.

INNoise In

Replaces the noise as the mixer's Noise channel.

INExt In

Replaces the external audio input as the mixer's Ext In channel; the Ext In knob sets its level. Euro Out into it feeds the voice back through the mixer.

OUTNoise Out

The mixer's noise in the colour Noise Color selects, before its level knob.

OUTExt Out

The external input's signal, before its mixer level. Cable it to a unit's Sidechain In to key it; the cable's amount is how much is sent.

OUTMix Out

The mixer's output, its overdrive included.

Utilities

INHPF In

The high-pass filter's input: nothing reaches it until patched.

INAtten In

What the attenuator scales; with nothing in, a constant (+DC).

OUTHPF Out

The high-pass filter's output.

OUTAtten Out

The Attenuator knob times Atten In, or the knob's own level.

Filter

INFilter In

Replaces the mixer as the filter's input.

INCutoff In

Moves the cutoff, on top of the knob and everything else.

INEnv Amt In

Adds to the Env Amt knob: the envelope's depth on the cutoff.

OUTFilter Out

The filter's output.

Envelope

INTrig In

Gates the envelope in place of the keyboard; a stereo cable gates each side's envelope on its own.

OUT+Env Out

The envelope, from 0 up to 1.

OUT−Env Out

The envelope upside down, from 0 down to -1.

Output

INVCA In

Replaces the filter as the VCA's audio input.

INVCA Amt In

Opens the VCA further, on top of its mode's level.

INMaster In

What the plugin plays: Board Out, or whatever is patched here instead.

OUTKB Out

The played note's pitch.

OUTKB Vel Out

The last note's velocity, or the sequencer's accent while it is on.

OUTGate Out

High while a key is down, or while an arp or sequencer step is gated.

OUTEuro Out

The finished voice before the volume: Main Out at 0 dB, however the volume is set. Into Ext In it feeds the voice back the same at any volume.

OUTMain Out

The finished voice, after the VCA and the volume, before any effect.

Pedalboard

INBoard In

What the Pedalboard's effects play: Main Out, or whatever is patched here instead.

OUTBoard Out

The Pedalboard's end: its last effect's output, or Board In with no effect.